| 陶瓷復合襯板/溜槽 | | 來源： 點擊數：4763次 更新時間：2020-5-14 16:00:13 | | | | 詳細簡紹： | |
陶瓷復合鑄造襯板（MMC-襯板），廣泛應用于球磨機、立式磨機（VRM）、自磨機/半自磨機、破碎機、溜槽、儲料倉等設備耐磨部位。高鉻陶瓷復合鑄造襯板（MMC-Cr-襯板）具有高硬度，高耐磨性高鉻復合鑄造輥套及襯板的平均磨損深度為每1000小時2-3mm(高鉻襯板每1000小時10-15mm）；高耐磨性高鉻復合鑄造導向板的平均磨損深度為每1000小時小于1mm；高耐磨性高鉻復合鑄造溜槽襯板的平均磨損深度為每1000小時10mm(高鉻襯板每1000小時25-30mm）。
馬氏體鋼基陶瓷復合鑄造襯板（MMC-M-襯板），MMC-M-襯板可焊接加工..耐磨板具有很好的焊接性能，同時承受較高的沖擊.
MMC liner for Ball mill, Vertical mill (VRM), AG/SAG, Crusher, Chute, storage bin.
1, High Cr cast iron matrix ceramic composite casting liner ( MMC-Cr-Liner) ,
the MMC-Cr liner has high hardness, high wear resistance
The average wear depth of the high-chromium composite casting roll sleeve and liner is 2-3mm per 1000 hours
(high-chromium roller and liner is 10-15mm per 1000 hours)
The average wear depth of the high-chromium composite casting Chute liner is 10mm per 1000 hours
(high-chromium Chute liner is 25-30mm per 1000 hours)
2, Martensite steel matrix ceramic composite casting liner ( MMC-M-Liner) ,
The MMC-M liner can be welded and machining.
The wear-resistant plate has very good welding performance while bearing high impact. | | 【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】 | | 上一篇：高錳鋼陶瓷復合鄂破齒板 下一篇：馬氏體鋼/高錳鋼陶瓷板錘 |
|
