• 網站首頁新聞動態產品中心公司資質關于我們合作伙伴
    首頁產品中心DJM產品  
    高錳鋼陶瓷復合鄂破齒板
    來源: 點擊數:2740次 更新時間:2020-5-14 10:23:59
    詳細簡紹:
    高錳鋼陶瓷復合鑄造圓錐破襯板(動/靜錐)及鄂破齒板
    The High Manganese Steel matrix ceramic composite Mantle/Concave and Jaw plate
    高錳鋼陶瓷復合鑄造圓錐破襯板(動/靜錐)及鄂破齒板,即在高錳鋼耐磨材料中熔鑄陶瓷顆粒,形成陶瓷金屬復合材料層,這層復合層的耐磨性能可達高鉻材料的2-3倍,同時繼承了高錳鋼的耐沖擊性能,
    通常,基材選用= Mn18Cr2
    熱處理后高錳鋼本體硬度= HB160-220 (沖擊后=HB500)
    陶瓷顆粒硬度= HV1400 
    熱處理后陶瓷顆粒硬度=HRC60-70 
    熱處理后陶瓷顆粒間硬度= HB400-HB500 
    陶瓷復合材料扎臼壁的使用壽命是常規高錳鋼的2倍以上,其適用范圍比高鉻材料更廣泛。
    The High Manganese Steel matrix ceramic composite Mantle/Concave and Jaw plate; That is ceramic particles are fused and cast in the wear-resistant material of High Manganese Steel to form ceramic metal composite layer. The wear-resisting property of the composite layer can reach 2-3 times that of the high chromium material, and it inherits the impact resistance of the High Manganese Steel.
    Normally, the basis material = Mn18Cr2
    Hardness of high manganesesteel after heat treatment (Impact hardness= HB500)
    Hardness ceramic particles= HV1400 
    Hardness ceramic particles afterheat treatment=HRC60-70 
    Hardness between ceramic particles after heattreatment= HB400-HB500 
    The service life of the ceramic composite Mantle/Concave and Jaw plate is more than 2 times that of the High Manganese Steel.
    【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
    上一篇:陶瓷復合軋臼壁 下一篇:陶瓷復合襯板/溜槽
      友情鏈接:   DJM-CASTING & FORGING  |  波紋補償器 |  bjjm-bj |  sauter-cn
    環球破碎機網淘寶動態評分SCR脫銷蓄熱式焚燒爐叉車尾氣凈化
    高鉻陶瓷復合_陶瓷復合鑄造_高錳鋼陶瓷復合 - 北京金煤創業科技股份有限公司 2016-2020 @ All Rights Reserved 京ICP備16053533號-1
    郵件:info@djm-bj.com 聯系電話:010-88909291  地址:北京市石景山區古盛路36院1號樓14層1403